home *** CD-ROM | disk | FTP | other *** search
- (c) Copyright 1993 Commodore-Amiga, Inc. All rights reserved.
- The information contained herein is subject to change without notice,
- and is provided "as is" without warranty of any kind, either expressed
- or implied. The entire risk as to the use of this information is
- assumed by the user.
-
-
- Game Port Form Factor
-
-
- The new models in the Amiga product family all use a standard a
- D-style, 9-pin male connector for mouse and joystick controllers. On
- the Amiga 600, the small size of the motherboard requires a design in
- which these two connectors are very close together.
-
- Shown below are the recommended dimensions to use for the female
- connector on a mouse or joystick compatible with all Amiga models.
- All dimensions are in millimeters.
-
- The diagrams below show the arrangement of the connectors on the new
- Amiga models, the Amiga 600, Amiga 1200, and Amiga 4000. Note that
- these show the openings in the Amiga's casework, not the size of the
- connectors. As you can see, the placement of the connectors on the
- Amiga 600 requires a mouse or joystick with a connector that conforms
- to the specification above. All dimensions are in millimeters.